Fender bender realities, Muscle car dreams.
Yep, we’ve won a few.
This auto service lives and breathe car restoration. We don’t just do minor ding and collision repair. We have built tens of dozens of cars from the bottom up, and we’re proud of the results. Are you a gearhead, too? Check out the projects below!
Were not just about American Muscle here at Ultimate and we like anything that looks cool and goes fast, That brings us to our next big project, our 1997 Toyota Supra.
Here it is the day we bought it, at the old owners house
In the “build” Bay of the shop, no escape now
The bumper was the first to go
Zak putting some work in
When we picked up the car it was mechanicaly stock but had a few changes done to it, namely the body kit and rims, other then that it was just your run of the mill supra.. Thats about to change. Starting with the front bumper first, we decided we were going to cut and modify it to get the one of a kind look we were after.
Here we have a 1940 ford Sedan 
Starting with a clean all steel body the sedan has had a few paint jobs and modifications over the years and then it got to us for a fresh start. After taking layers and layers of old paint off, we got down to the nitty gritty of the paint
Welding trunk lid for perfect gap
The first thing we did was line up all panels and cut/ and weld the body seams to get the perfect gap, some metal was taken away, and some metal was added to get clean crisp lines.
Getting Drip Rail Straight, and Fitting Door to roof
Next up we repaired both roof drip rails, and fit the doors to the roof, Older Cars had very poor fit and finish, Alot of metal working and bending goes in to getting perfect gaps.
After Getting the panels fit to the body it was now time to install all latches, this of course required more modification. After getting everything where we wanted, we reinforced the door “strikers” for a more “Solid” door slam.
Fitting the door strikers
Smoothin it out, checking door fitment as we go
Checking trunk fitment
Bare Bones
Once all body panels were fit, and opening and closing as they should, we stripped the car back down to a shell to start the body work.
Now we can concentrate on the shell, the car previously had a smoothed firewall, but the metal was very wavy and stretched out in many places and filled in with a alot of body filler, so we broke out the torches and hammers, and “shrank” the metal back down. Not only did we gain some more room on the firewall, we only need a skim coat of bondo to smooth it back out.
A little more Shrinking and its ready for hammer and dolly work
The interior of the coupe is going to be a one of a kind show stopper. Starting with a completly hand made center console, It houses a 5 In 1 gauge that will be keeping tabs on all engine functions, and has a custom owner made bezels for both the radio, and gauge sourround.
Custom center console, and no those are not cup holders on top, they are ducts for the heater
The dash board will be getting a custom pop out center panel
A major front-end collision restored to new, by Lew and his team at Ultimate Restoration Auto Center. Can you tell the difference? Click here for more photos!
Fender benders – we’ve all had them. At Ultimate Restoration Auto Center, we’re specialists in making your car look like it never happened.
You’re special, and you want a car that shows it off. Why have a car that looks ‘stock’ when you can make your ride draw oooohs and aaaahhhs?
Do you know we can mix our own paints? It’s true. That means you can site next to us and say, “Add a little more red, would you, Lew?” With our in-house painting system, we can match ANY factory color, and create custom colors to your specifications.
Awards? We GOT awards. We’ve built tons of cars from the ground up – from muscle cars, to trucks, ground-huggers and motorcycles. The question is: what are we going to do for YOU?
 |
 |
 |
 |
 |
 |
 |
Look for this sticker on pages to get The Ultimate 11-POINT Visual Safety Inspection ABSOLUTELY FREE